The imported fully transparent liquid silicone rubber transparent liquid silicone Characteristics and Uses: This series of products is a two-component molding liquid silicone rubber has excellent weather resistance, good dimensional stability, high transparency, non-toxic and environmentally friendly, stick with the cloth Relay good, heat up to 250 ℃ above widely used apparel signage production. Screen printing silicone screen printing, can be firmly adhered to in textiles, non-woven fabrics, the special silicone surface of leather, leather and other materials. Screen printing silicone extremely wide range of uses, with a strong sense of three-dimensional pattern of screen printing silicone, with soft and complement the textiles or leather goods, silk screen pattern also has excellent peel strength, abrasion resistance, brightness; also has a waterproof, non-slip, breathable, resistant to high temperature and good leveling. Usage: 1. Mixed: rubber and curing agent than 10:1 by weight (the gum increase the amount of curing agent will slow down the curing speed), mixed mixing equipment can be manually or use. 2. Deaeration: mixed rubber vacuum degassing should do signage or trademark printed on the fabric. Under vacuum, the volume of the rubber material may be increased 4-5 times, therefore, the degassing of the container should be 4-5 times larger than the volume of the plastic material, plastic material volume back to normal after a few minutes, when the surface no bubbles escape (approximately ten minutes) and that the end of the degassing, when used in small amounts in a vacuum desiccator. 3. Molding: defoaming rubber, can be taken to the dispensing or scraping gum, the plastic material is injected into the mold, thermoform. Packaging, storage and transportation considerations: 1. The products based glue 2kg / tin packaging 20kg / drum, curing agent. 2. This product should be stored in a dry, ventilated shade to prevent rain and sunlight. 3. During operation to avoid contact with the curing agent of the condensation type silicone rubber. May cause the plastic material does not cure as well as amines, sulfur, phosphorus compounds, and some of the metal salts. The use of the process should avoid moisture intrusion. 4. The storage period of the product for one year, under shear (strong mixing) can restore their mobility. Recommends using rubber on the first container, stir, then add hardener Stir. Extended reinspection qualified can still be used. 5. This product is a non-dangerous goods.